PhotonView Quantum Yield Measurement Software
PhotonView
Software v2.6.1PLQY, EQE, spectral and lifetime measurement; Ocean Optics and Pynect spectrometers
PhotonView is Pynect's next-generation optoelectronic test software upgraded from ElectronView. Version 2.6.1 adds a PLQY (photoluminescence quantum yield) module with two-step blank/sample absolute measurement, while keeping full spectral, EQE, lifetime, time-series, probe-station and source-meter control capabilities.
Software Overview
PhotonView is Pynect's next-generation optoelectronic test software, upgraded from ElectronView for quantum yield and optical-electrical characterization of LEDs, Micro-LEDs and other light-emitting devices. Version 2.6.1 keeps every ElectronView capability (spectral, EQE, lifetime and probe-station measurement) and adds a dedicated PLQY (photoluminescence quantum yield) module, rebuilt on Qt 6.10 with C++ for faster rendering and more stable long-term runs.
Special note: On first installation, the Ocean Optics spectrometer driver must be installed (download); for Pynect spectrometers install the FTDI driver (download).
The software supports the full range of Ocean Optics (Ocean Insight) spectrometers as well as Pynect models such as SPEC-CMS960, SPEC-CDS350 and NIR-F950. It is compatible with source meters including Keithley 2400, 2450, 2611, 2614, 2636 and Keysight B2901, B2902, 2901, 2912, and supports serial probe-station control. It currently supports 64-bit Windows 10 / 11.
Core features:
- PLQY measurement: a dedicated module using the absolute (two-step blank + sample) method; sets excitation and emission ranges, shows fluorescence peak wavelength, peak intensity, fluorescence radiant flux and PLQY in real time, with CSV export.
- Spectral measurement: raw spectrum, dark-subtracted spectrum, optical power, photon count, reflectance, transmittance, absorbance, peak wavelength, FWHM, etc.
- EQE measurement: real-time IV curves, luminance distribution, optical power curves, EQE, peak wavelength and chromaticity coordinates as voltage or current is stepped; supports data export.
- Lifetime measurement: at a specified voltage or current, measures the time until luminance, optical power or EQE drops to a given proportion, such as T90, T70, T50 (customizable).
- Time-series measurement: monitors a specified wavelength or range over time with automatic data saving.
- Probe control: lights up specified LED numbers on the probe station, supports multi-select or select-all, and measures all emitting points with one click.
- Source meter control: built-in SCPI and TSP command sets; supports Keithley and Keysight source meters, either combined with automatic EQE measurement or controlled independently.
- Data management: archives results by project/experiment folder structure, saving result tables, curve screenshots and full spectral distributions for every step.



Version History
PhotonView 2.6.1
Release date: November 16, 2026
Download: PhotonView-x64-2.6.1-setup.exe
- Added the PLQY (photoluminescence quantum yield) module with two-step blank/sample absolute measurement and real-time peak wavelength, peak intensity, radiant flux and PLQY results.
- Added the "photon count (photons/s/nm)" display mode, which reports fluorescence radiant flux together with radiometric calibration.
- Rebuilt on Qt 6.10 with C++, improving high-DPI scaling and real-time rendering of large spectral data sets.
- Carries over and optimizes every ElectronView module: spectral, time-series, EQE, lifetime, probe-station and source-meter control.